Unipro 6003 is identical with the Unipro 7003, except the fact that the 6003 "only" stores two hours of data logging, where the 7003 stores 8 hours 45 minutes. 6003 is both a Laptimer and a Data Logger It means that the driver as well as the mechanics can see and analyze results directly in...
Unipro Junction Cable for Water Temp. Sensor Article covers cable only, sensor is supplemental.
Unipro Fittings for Exhaust Sensor. This fitting for the exhaust sensor must be welded to the exhaust.
The bracket is welded to the exhaust at 12 cm from the back of the piston. In this way, the exhaust gas sensor measures the gas and not the flame temperature.
Sensor for measuring the speed of 2-stroke engines.
This active RPM sensor is a small sensor that is mounted on the spark plug cable between the ignition coil and the spark plug. The sensor is attached with strips. This active RPM sensor consists of nothing less than 21 components mounted on either side of a small circuit board on the tube. This active sensor feeds the Laptimer with a clean stream of ignition pulses. Combined with the advanced digital filtering in the Laptimer, this sensor plays an important role in giving the best RPM measurement on the market. The RPM sensor is made with a high quality cable and connector and is molded to prevent moisture from entering the electronics.
Unipro Speed Kit Front Wheel - Speed sensor is a speed kit that allows you to measure speed and split, optionally installed with the Unipro 6003 Laptimer. Very high precision with 6 magnets per revolution, which typically gives a resolution of only 14 cm, and the speed sensor gives an accuracy of 0.5% from 0 to 350 KMH.
Unipro Speed Kit Rear - Speedometer Unipro Speed Kit Rear - Speedometeris a speed kit that allows to measure speed and split. Very high precision with 6 magnets per revolution, which typically gives a resolution of only 14 cm, and the speed sensor gives an accuracy of 0.5% from 0 to...
Sparco Carthusian - Silver - Blue coloured cover with waterproof protection and reinforcement at the part in contact with the exhaust.
Unipro Splitter 1 speed sensor connection for UniGo. This splitter can be used for all inputs except temperature. For example, it can be used to split the RECV input on the UniGo into a receiver and speed input.
Unipro T-Junction with 17mm Connections (for Water Temp. Sensor)
End of content
End of content
No products in the cart.
